Philips HTS7500 Map the devices to the audio inputs, Update audio mapping from connected devices

Map the devices to the audio inputs

Note

•Before you start, ensure that the audio output of the HDMI TV and other HDMI devices have been connected to the audio input jacks on this Home Theater System.

Video Setup	EasyLink	On
Audio Setup	One Touch Play	On
Preference Setup	One Touch Standby	On
EasyLink Setup	System Audio Control	Off
Advanced Setup	Audio Input Mapping

1Press , select [Settings], then press OK.

2Select [EasyLink Setup], then press .

•[One Touch Play] and [One Touch Standby] functions are turned on by default.

3Select [System Audio Control] > [On].

4Read the on-screen instructions and press OK to select [Continue].

»The HomeTheater System scans and displays the valid devices.

5Press OK to select [Continue].

Philips TV	Aux1
Recorder	Aux2
DVD player	Coaxial
	Optical

6Select a connected device on the left of the menu, then press .

7Select the connector that is used for the device, then press OK.

»Repeat steps 6~7 to map other devices.

8Press to exit the menu.

Update audio mapping from connected devices

If you have already mapped audio from connected devices, you can use this procedure to update your mapping.

1Press , select [Settings], then press OK.

2Select [EasyLink Setup] > [Audio Input Mapping], then press OK.

3Select a connected device then press .

4Select the connector that is used for the device then press OK.

5Repeat steps 4~5 to map other connected devices.

22EN