Philips HX6711 manual Features, Deactivating or activating the Easy-start feature, Smartimer

English

Features

Easy-start

-This Sonicare comes with the Easy-start feature activated.

-The Easy-start feature gently increases power over the first 14 brushings to help you get used to brushing with the Sonicare.

Note: Each of the first 14 brushings must last at least 1 minute to move through the Easy-start ramp-up cycle properly.

Note:When the Clean and White mode is selected, the Easy-start feature is inactive.

Deactivating or activating the Easy-start feature

1Attach the brush head to the handle.

2Place the handle in the plugged-in charger.

-To deactivate Easy-start:

Press and hold the on/off button for 2 seconds.You hear 1 beep to indicate that the Easy-start feature has been deactivated.

-To activate Easy-start:

Press and hold the on/off button for 2 seconds.You hear 2 beeps to indicate that the Easy-start feature has been activated.

Note: Use of the Easy-start feature beyond the initial ramp-up period is not recommended and reduces the effectiveness of the Sonicare toothbrush in removing plaque.

Smartimer

The Smartimer indicates that your brushing cycle is complete by automatically switching off the toothbrush at the end of the brushing cycle. Dental professionals recommend brushing no less than 2 minutes twice a day.

If you want to pause or stop brushing during the 2-minute brushing cycle, press and hold the on/off button for 2 seconds. Press the on/off button again and the Smartimer picks up where you left off.

The Smartimer automatically resets to the beginning of a 2-minute cycle if:

-you stop brushing for 30 seconds or longer.

-you put the handle in the charger.

Quadpacer (select models)

1

2

4 3

-The Quadpacer is an interval timer that has a short beep and pause to remind you to brush the 4 sections of your mouth evenly and thoroughly.

-When you use the two-minute Clean or Sensitive mode, you hear a short beep and a pause in brushing action at 30, 60 and 90 seconds.