Philips HX6950, HX6972/10 Getting started, Changing the color code ring, Attaching the brush head

6ENGLISH

Getting started

Changing the color code ring

Sonicare brush heads come with interchangeable color code rings to identify your brush head.

To change the color code ring:

1 Pull the color code ring from the bottom of the brush head.

2Install a new ring by slipping one edge of the new ring over the

bottom of the brush head.

Attaching the brush head

1 Align the brush head so the bristles face the front of the handle.

2 Firmly press the brush head down on the metal shaft until it stops.

Note:There is a small gap between the color code ring and the handle.

Charging your Sonicare

1Put the plug of the charger in a live electrical outlet.

2 Place the handle on the charger.

,The flashing light of the battery gauge indicates that the toothbrush is charging.

-1 solid green LED indicates that the toothbrush is 34-66% charged.

- 2 solid green LEDs indicate that the toothbrush is 67-94% charged.

-3 solid green LEDs indicate that the toothbrush is fully charged.

Note: If the battery charge of your Sonicare is low, you hear 3 beeps and 1 LED of the recharge gauge flashes yellow for 30 seconds after completing the brushing cycle.

4235.020.3356.1.indd 6

06-04-09 09:32