52 ListingServices
1.
Plug one end of a RS-232 cable (9 pin D-
subcable) into the RS-232 port on the dig-
ital receiver, and the other end into the
matchingport on the other digital receiver.
2. Turn on the source digital receiver.
3.
Selectthe Installation
>
TransferFirmware
>
TransferData to Other IRD menu, then
youget asked for confirmation; select Yes.
4.
Tostart the data transfer,turn on the target
digitalreceiver.
5.
A progress bar appears showing the
progressof the data transfer.
6.
Restartthe target digital receiver when the
datatransfer is complete.