4.1Searching broadcasting services 33
andthe Pilot option will become enabled. Youalso should
setthese options correctly.
NOTE
Youmay get transponder information from a satellite magazine
or website such as
http://www.satcodx.com
or
http://www.
lyngsat.com.
Searchingone service of a transponder
Tosearch one service of a transponder, perform the following
steps:
1.
Choose your desiredsatellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Advanced.
3.
Chooseyour desired transponder at the Frequency op-
tionor enter it with the numeric buttons.
4.
Enterthe symbol rate of your desired transponder to the
SymbolRate option with the numeric buttons.
5.
Set the Polarization option to the polarization of your
desiredtransponder.
6.
Specifythe packet identifiers of your desired service at
thePID option with the numeric buttons. A packet iden-
tifieris used to verify audio and video streams.
Searchingevery service of SMATV system
Tosearch every service of a SMATV system, if the digital re-
ceiveris connected to it, perform the following steps:
1.
Choose your desiredsatellite at the Satellite Name op-
tion.
2. Set the Search Mode option to SMATV.
3.
Chooseyour desired transponder at the Frequency op-
tionor enter it with the numeric buttons.