14 Setup
To enjoy Dolby digital audio, your televi-
sionor audio system must be able to decode
Dolbydigital audio, and you will need to ob-
tain a S/PDIF cable. Plug one end of the
cable into the S/PIDF socket on the digital
receiver,and the other end into the matching
socketon your audio system.

2.4.3 Connectingto your video cassette recorder

Thedigital receiver can also output video to another appliance
suchas a video cassette recorder or video receiver through an
auxiliarySCART connector.
Youwill need to obtain a SCART cable to use
theauxiliary SCART connector. Plug one end
ofthe cable into the VCR socket on the digital
receiver,and the other end into the match-
ingsocket on your video cassette recorder or
suchlike.
2.5 Switching on for the first time
Nowthat you have your digital receiver connected, you should
plugit in to a mains socket. Ensurethat your television set is
turnedon, so that you will be able to see the display from the
digitalreceiver.

2.5.1 Insertingbatteries in the remote control

Toinsert the batteries, open the battery compartment by remov-
ingthe lid, and then insert the batteries observing the polarity,
whichis marked on the base of the battery compartment.
Ifthe digital receiver no longer reacts properly to remote con-
trolcommands, the batteries may be flat. Be sure to remove