Philips Semiconductors | ISP1362 Linux Stack User’s Guide |
1. Introduction
1.1.Purpose
This document explains how to install, configure and use the ISP1362 Linux stack.
1.2.Scope
This document is intended for the users of the ISP1362 evaluation kit on Linux.
1.3.Abbreviations
DCD | Device Controller Driver |
FSM | Finite State Machine |
HCD | Host Controller Driver |
IDP | Integrated Development Platform |
OS | Operating System |
OTG | |
USB | Universal Serial Bus |
2. Concept
2.1.Overview
The ISP1362 is a
Using the ISP1362 Linux stack, the ISP1362 can function as:
•A standard USB
•A USB
•A USB host when connected to USB peripherals (OTG and non OTG).
The ISP1362 Linux stack is a group of kernel and application modules arranged such that the code can be easily ported to any other platform running the Linux OS. All the
2.2.Stack Architecture
Figure
•Core modules (these modules are
•Application demo modules
•Porting modules (these are
The following subsections briefly explain each module.
| © Koninklijke Philips Electronics N.V. 2003. All rights reserved. | |
User’s Guide | Rev. | 6 of 34 |