Philips Semiconductors | ISP1362 Linux Stack User’s Guide |
ISP1362 Evaluation Kit on Machine 1
ISP1362 Evaluation
Kit on Machine 2
OTG Cable
USB Peripherals on Machine 1
USB Peripherals on Machine 2
Figure
3.1.ISP1362 PCI Evaluation Kit
3.1.1.Setting Up the PC and OS
For one evaluation kit, prepare one PC. The ISP1362 Linux stack does not support two or more boards on one PC at the same time. Therefore, for the ISP1362 OTG evaluation, you must have two PCs.
The ISP1362 Linux stack can run on any X86 CPU (preferably, Intel® Pentium® or above, for the desktop environment). The ISP1362 Linux stack on X86 PCI platform has been tested with Linux kernel version 2.4.20 on Red Hat distribution. The stack should work with other distributions as well. Linux kernel versions 2.4.21 or above need a different kernel patch for OTG. Therefore, it is preferable to have a PC running kernel version 2.4.20.
3.1.2.Setting Up the ISP1362 Evaluation Kit
The ISP1362 PCI evaluation kit can be configured in various modes of the ISP1362: the
3.1.3.Setting Up the Software
This section explains how to install the ISP1362 Linux stack. Explanation on the installation or setting up of USB
3.1.3.1.Setting Up the Linux Kernel
1.Install the Linux kernel source code in a directory (This installation
| © Koninklijke Philips Electronics N.V. 2003. All rights reserved. | |
User’s Guide | Rev. | 9 of 34 |