Philips ISP1362 Contents, 2.3.1, 2.3.2, 2.3.3, 2.4.1, 2.4.2, 2.5.1, 2.5.2, 3.1.1, 3.1.2, 3.1.3

Philips SemiconductorsISP1362 Linux Stack User’s Guide

CONTENTS

1.	INTRODUCTION		6
1.1.	PURPOSE		6
1.2.	SCOPE		6
1.3.	ABBREVIATIONS		6
2.	CONCEPT		6
2.1.	OVERVIEW		6
2.2.	STACK ARCHITECTURE		6
2.3.	CORE MODULES		7
2.3.1.		Host Stack	7
2.3.2.		Device Stack	7
2.3.3.		OTG Stack	8
2.4.	APPLICATION MODULES		8
2.4.1.		Mass Storage Disk Emulation	8
2.4.2.		OTG Applications (OTG Mass Storage Demo/OTG Tools)	8
2.5.	PORTING MODULES		8
2.5.1.		Hardware Access Layer Driver	8
2.5.2.		Mass Storage Bridge	8
3.	INSTALLATION		8
3.1.	ISP1362 PCI EVALUATION KIT		9
3.1.1.		Setting Up the PC and OS	9
3.1.2.		Setting Up the ISP1362 Evaluation Kit	9
3.1.3.		Setting Up the Software	9
3.2. ISP1362 ADD-ONCARD FOR INTEL PXA250 BASED ACCELENT IDP (REV 04)			11
3.2.1.		Setting Up the ISP1362 Add-On Card	11
3.2.2.		Host PC Setup	11
3.2.3.		Accelent IDP (Rev 04) Target Setup	13
3.3. ISP1362 ADD-ONCARD FOR INTEL PXA250 BASED ACCELENT IDP (REV 02)			14
3.3.1.		Setting Up the ISP1362 Add-On Card	15
3.3.2.		Host PC Setup	15
3.3.3.		Accelent IDP Setup	18
4.	OPERATING THE ISP1362 LINUX STACK		19
4.1.	ISP1362 PCI EVALUATION KIT		19
4.1.1.		Loading the Stack	19
4.1.2.		Unloading the Stack	20
4.2. ISP1362 ADD-ONCARD FOR INTEL PXA250 BASED ACCELENT IDP (REV 04)			20
4.2.1.		Loading the Stack	20
4.2.2.		Unloading the Stack	20
4.3. ISP1362 ADD-ONCARD FOR INTEL PXA250 BASED ACCELENT IDP (REV 02)			20
4.3.1.		Initializing the Stack	20
4.3.2.		Loading the Stack	21
4.3.3.		Unloading the Stack	21
4.3.4.		Closing the ISP1362 Stack	21
4.4.	ISP1362 HOST STACK		21
4.5.	ISP1362 DEVICE STACK		22
4.6.	ISP1362 OTG STACK		23
UM10012-_2		© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
User’s Guide		Rev. 1.2—July 2003	3 of 34