4.4.2 Menu language
(1)Select language.
The menu language can be switched between {{German}, {English}, {French}, {Italian}, {Spanish}, {Dutch} and {Turkish}.
(2)Select character set.
Automatic switching of the character set is defined in the DVB standard - however unfortunately not all stations observe this standard with the result that characters from an incorrect character set may appear in a text.
Automatic character switching is provided in this unit, however various character sets can be installed if required, so that e.g. Greek texts are shown in the correct character set and are thus legible.
Selection: {Auto} {Standard} {Latin} {Cyrillic} {Arab} {Greek} {Hebrew}.
4.4.3 Signal paths
Activation and modification of each individual field are following the usual procedure.
Select the appropriate input field {XYZ} using keys 0...9 or W / V and activate using the OK key.
The parameters are set using the V or W key. The selection is confirmed using the OK key.
(1) | TV | VCR | Video output signals at TV and VCR SCART sockets |
-- - - - - - - - - - - The following groups are possible in the TV and VCR sockets.
CVBS CVBS CVBS YC
| RGB | CVBS | (RGB offers the best picture quality on the television set) |
| RGB | YC | (You can use YC with SVHS video recorders) |
| YC | CVBS |
|
| YC | YC |
|
| CVBS: | = Composite Video Broadband Signal | |
| FBAS: | = Farbbild Austast Synchron Signal (equals CVBS) | |
| YC: | = like S video (Y: «brightness», C: «croma») | |
(2) | TV > | VCR | Video/audio return path from TV to VCR unit |
If {ON} is selected, the video and audio signals are also transmitted from the TV socket to the VCR socket in standby mode.
In {OFF} position the power consumption is reduced by approximately 0.5 watts.
(3) VCR signal VCR signal from VCR unit to VCR SCART socket
In VCR play mode you can choose between {CBVS/RGB} or {YC} = S video for connecting a SVHS video recorder.
(4)Picture format
If the {4:3} setting is set, all programmes are viewable in the 4:3 format
If the {16:9} setting is set, programmes transmitted in
However, automatic adjustment of the picture width is only effective if your TV unit is equipped to process and display 16:9 formats (switching voltage 16:9 = 6 volts).
GB
17
