![OPERATING YOUR UNIT](/images/new-backgrounds/160729/16072913x1.webp)
OPERATING YOUR UNIT
3.1 LOCAL OPERATION
Open (and close) the flap on the front of the unit by pressing the marked area (on the
Local operation is by means of the keys STANDBY, V and W for switching between channels upwards/downwards (CH
To switch between radio and TV, press the STANDBY key briefly and then within one second the C key for radio or B for TV mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 5 | 4 | 6 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
1 - Flap
2 - 4 Digit LED front indicator
3 - B: standby key
4 - C and B: adjust volume key (Vol
5 - V and W: upwards/downwards channels key (CH
r t
The LED indicator shows Radio/TV selection mode for one second.
The unit has an on/off switch with power separation.
The indicator for the channel number is via the
P 9 9 9
r25 t 1 2 3
P2.3.4. V c r
V c r -
-
TV channel indicator
Radio channel indicator
Indicator t = TV mode (+ channel number of satellite receiver)
N.B.: If the unit has been switched to TV mode by means of the TV key, the image on the TV unit is the one transmitted by the TV unit, e.g. from an addi- tional cable source.
The points are indicated if the unit is switched to «mute».
VCR indicator:
During
VCR indicator: switched through in standby mode.
The unit is in standby mode and can be switched on using the STANDBY key.
6