29
21 Automatic tuning of analogue programmes
This menu allows you to automatically search
for all the analogue programmes available in
your region.
Before you automatically search for all the
analogue programmes, ensure the TV is in
analogue mode. If it is in digital mode, press
the (Analogue / Digital) key to enter
the analogue mode.
1 Press the key.
2 Press the Î / ï key repeatedly to
select Install and the Æ / key to
enter the Install menu.
3 Press the ï key to select Auto Store
and the Æ / key to start automatic
searching of the channels. All the
available TV programmes will be stored.
This operation takes a few minutes. The
display shows the progress of the search
and the number of programmes found.
IMPORTANT
To exit or interrupt the search before it
is completed, press the key. If you
interrupt search during auto store, not all
channels will be stored. For all channels to
be stored, you need to do a complete auto
store search again.
Note
ATS (Automatic Tuning System)
feature
If the transmitter or cable network sends
the automatic sort signal, the programmes
will be numbered correctly. In this case,
the installation is complete. If this is not the
case, you can use the Sort menu to number
the programmes to your preference.
ACI (Automatic Channel Installation)
feature
If a cable system or a TV channel which
broadcasts ACI is detected, a programme
list appears. Without ACI broadcast, the
channels are numbered according to your
language and country selection. You can use
the Sort menu to renumber them.
Note
You cannot change the Language or
Country in Analogue mode. If you want
to change the Language or Country,
you have to exit Analogue mode and
enter into Digital mode to do so (refer to
“Preferences”on page 18).
Auto Store
Program 3
TV 196 MHz
Main
Picture
Sound
Features
Install
Brightness
Colour
Contrast
Sharpness
Colour Temp
Contrast+
NR
Auto Store
Manual Store
Sort
Name
Fav. Program
Main
Picture
Sound
Features
Install