Philips LX3700D manual Preparations, Inserting batteries into the remote control, English

Preparations

English

Inserting batteries into the remote control

1 Open the battery compartment.

2 Place the batteries in the compartment with the correct polarity as indicated by “+“ and “-“ symbols.

3Close the cover.

CAUTION!

–Remove batteries if they are exhausted or will not be used for a long time.

–Do not use old and new or different types of batteries in combination.

–Batteries contain chemical substances, so they should be disposed off properly.

Switching on the system

IMPORTANT!

Make sure you have completed all the necessary connections. (See page 10 “Connecting TV”)

1Press STANDBY ON to switch on the system.

2Press SOURCE until “DISC” appears on the display panel (or press DISC on the remote).

3Turn on the TV and set to the correct video-in channel.You should see the blue Philips DVD background screen on the TV.

➜Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.

➜Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

➜Or, the TV remote control may have a button or switch that chooses different video modes.

➜Or, set the TV to channel 3 or 4 if you are using an RF modulator.

–If you do not get a proper picture or sound, please refer to “System Setup (DVD)” in order to change the pre-settings as necessary to accommodate your TV system or change to your preferred settings.

PREPARATIONS 17