Preparations
English
16:9
(Wide screen)
4:3 LB (Letter Box)
4:3 PS (Pan Scan)
–TV System
Allows you to select the color system matching the connected TV set.
AUTO
–If the connected TV is multi system, select this mode.The output format will be in accordance with the video signal of the disc.
NTSC
–If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format.
PAL
–If the connected TV is PAL system, select this mode. It will change the video signal of a NTSC disc and output in PAL format.
–Video Out
Video out selection enables you to choose the type of video output suitable for your DVD system.
PR PB Y / SCART
–Select PR PB Y / SCART if you have connected the video output to your TV using SCART jack. (PR PBY this function is not available for this model.)
–Select
Note:
–You do not need to adjust the video output setting if you are using VIDEO jack (yellow) to connect the DVD system to your TV.
–Screen Saver
If set to ON, when you leave the system in stop or pause mode for more than five minutes, the screen saver will be activated. The default setting is ON.
Setting the sound 
–Digital Output
Digital output selection enables you to specify the type of digital output suitable for your amplifier or receiver.
●Select ALL if you have connected the digital output (COAXIAL or OPTICAL) to a multichannel decoder receiver.
●Select PCM 96K if the external components is capable of processing digital signal input with sampling rates of 96 kHz.
●Select PCM 48K if the external components is incapable of processing 96 kHz digital signal input, then convert to standard signal with sampling rates of 48 kHz.
●Select OFF to deactivate the digital output (COAXIAL or OPTICAL).
–Night mode
Set night mode to on to level out the volume. For example, the disc will play at the same sound level throughout the movie. The default setting is OFF.
Night function can also be accessed via the remote control.
Off
Select this when you want to enjoy the surround sound with its full dynamic range.
On
Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to audible level.This feature is only available for movies with Dolby Digital mode.
–Center Delay
If the listening position is closer to the center speaker than the front speakers, you can set the center delay time to improve the surround sound effect.
Options : 5ms, 3ms, 2ms, 1ms or OFF .
–Rear Delay
If the listening position is closer to the rear surround speakers than the front speakers, you can set the rear delay time to improve the surround sound effect.
Options : 15ms, 12ms, 9ms, 6ms, 3ms or OFF,.
–Test Tone (DISC mode only)
If set to ON, the system will test the speaker settings. The test signal is generated through the left, center, right, and rear (surround) speakers.The default setting is OFF.
PREPARATIONS 19
