Philips LX8000SA manual Setting the sound

Eng li	16:9
sh
	(Wide screen)

4:3 LB (Letter Box)

4:3 PS (Pan Scan)

Note:

– The format you select must be available on the disc. If it is not, the settings for TV Shape will not affect the picture during playback.

öBlack level shift (NTSC output only)

Select On if you set the DVD system to NTSC and you are playing NTSC-compatible DVDs. This will improve the colour contrast and picture.

öVideo shift

Use this setting to move the picture on your TV to the left or right. The default setting is in the centre.

öColour settings

You can select one of the predefined sets of colour settings: Personal, Rich, Natural, Soft or Animation..

öPersonal colour

It allows you to define your own set of colour settings by adjusting : Saturation, Brightness and Contrast. Use 34 keys to adjust the values of these settings, then press OK.

öTV System (NTSC/PAL conversion)

This setting is applicable only if you used the CVBS or SCART jacks to connect the DVD system to a TV. Select the colour system that matches the connected TV.

You do not need to change the setting if your TV is PAL-compatible. The factory default setting is PAL. It will change the video signal of a NTSC disc and playback in PAL format.

If your TV is compatible with both NTSC and PAL, select AUTO.

If your TV is NTSC-compatible,

select NTSC. It will not support the PAL format DVDs and playback of a PAL DVD is not possible.

Note:

– Slight picture distortions may occur due to this conversion. This is normal.

Setting the sound

1en	1en	1	st
Digital output		All
Analogue output
		Stereo
Night mode
		On
Karaoke vocal
		Off
Speakers		Settings...
PCM output
		48 KHZ

öDigital output

Digital output lets you specify the type of digital output available with the other equipment connected.

Select All, if you have connected the DVD system’s DIGITAL OUT jack to an equipment that has a multichannel decoder.

Select PCM only (default setting), if the other equipment is not capable of decoding multichannel audio.

Select Off to deactivate the digital output.

Note:

– You cannot hear the SACD or MP3-CD playback if you use the digital connection.

öAnalogue output

Select Stereo, 3D sound (TruSurround) or Multi-channel to match your DVD home cinema system’s playback capability.

This function can also be accessed via the SURROUND button on the remote control.

14PREPARATIONS