24
POWER SAVER MODE
The following message appears when the monitor is on but in D PMS (Display Power
Management Signaling) mode. This occurs after a valid incoming video signal is no longer preset or when
the PC has signaled the monitor to enter the POWER SAVER MODE . The message is displayed for 5
seconds and then removed. The LED remains amber. The “PC” POWER SAVER MODE message
indicates the monitor is setup to receive incoming video through the 15-pin analog VGA input connector.
The “DIGITAL” POWER SAVER MODE message indicates the monitor is setup to receive
incoming video through the DVI-D input connector.
PROCESSING AUTO CONFIGURATION
The following mess age appears when the monitor is performing an automatic self configuration.
An auto configuration can be initiated by pressing the SELECT button with no OSD s creen being
displayed or by selecting the AUTO ADJUST option from the POSITION OSD menu.
PC
DIGITAL