Basic Functions
English |
IMPORTANT!
Before you operate the system, complete the preparation procedures.
Plug and Play
Plug and Play allows you to store all available radio stations automatically.
First time setup/power up
1When you turn on the power supply,
"PRESS PLAY TO INSTALL TUNER" is displayed.
2Press 2 to start installation.
➜"INSTALLING TUNER" is displayed, followed by "AUTO PROGRAM IN PROGRESS...".
➜All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by AM band.
➜When all the available radio stations are stored or the memory for 40 presets is used, the last preset radio station will be played.
To reinstall Plug and Play
1In standby mode, press and hold 2 until "PRESS PLAY TO INSTALL TUNER" is displayed.
2Press 2 again to start installation.
➜ All previously stored radio stations will be replaced.
To exit without storing the Plug and Play
●Press Ç.
➜ If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the power supply again.
Notes:
–When the power is turned on, the disc tray may open and close to initialize the system.
–If no stereo frequency is detected duringPlug and Play, "PLEASE CHECK ANTENNA" is displayed.15
