What is the power voltage requirement for the MC-i200 stereo system?

Check whether the power voltage as shown on the type plate corresponds to your local power voltage, and consult your dealer or service organization if it does not.

How can I quickly start using the MC-i200 stereo system for music?

Connect the power cord, FM wire antenna, AM loop antenna, speakers, and insert batteries into the remote control. You can then listen to music from the TUNER and CD sources.

What steps are involved in setting up the home network for the MC-i200?

Connect your PC, gateway router, and broadband modem cable/DSL according to the routers setup instructions, configure your gateway router, and connect the MC-i200 to the gateway router after ensuring the PCs Internet connection is installed properly and working.

MC-i200 Getting Started, General information, Power

MC-i200Getting Started

General information

This quick installation guide gives a rough overview and helps to quickly start with basic steps. Please read the supplied instruction manual for detailed information.

Power

1 Check whether the power voltage as shown on the type plate corresponds to your local power voltage. If it does not, consult your dealer or service organization.

2 After all connections have been made, connect the power cord to AC MAINS~ and to the wall outlet. This switches on the AC power supply.

To disconnect the set from the power completely, remove the power plug from the wall outlet.

Basic audio setup

Connect :

1 Power cord A

2 FM wire antenna B

3AM loop antenna C

4Speakers D

5Insert batteries into remote control.

You can now already listen to music from the sources TUNER and CD!

B		A
		A
speaker	AM	FM
speaker	C
(right)	C

speaker

(left)

Prerequisites for the home network setup

1 Connect your PC, gateway router and broadband modem (cable/DSL) according to the router’s setup instructions.

2 Configure your gateway router following the directions specified in your router’s manual and make sure that the PC’s Internet connection is installed properly and working. If you have problems with the setup of the Internet connection, contact your networking equipment manufacturer.

IMPORTANT!

Do not connect the streamium MC-i200 to the gateway router before the internet connection of the connected PC through the router is working.

Connecting Streamium MC-i200 to the Internet through a gateway router

3 After the Internet connection has proven to be working, connect the MC-i200 to the gateway router with the supplied cable.

4 Press INTERNET.

Depending on your network setup, you might have to enter network configuration data. Please follow the instructions on the system’s display, using the Navigation Jog, the OK/PLAY (É) and the numerical/alphabetical keypad on the remote control to enter the requested connection information.

gateway router

DSL or

cable modem

from RJ45

INTERNET

data port

N A V IG A TE PLA Y FA V O RITES

FAVORITES

•

• VIEW

softkeys	•	•
		OK
	BACK	ENTER
Navigation Jog
OK/PLAY	RESUME	CANCEL
	OPTIONS INTERNET PC LINK	CD TUNER AUXiR
OPTIONS
INTERNET		CLOSE
		OPEN/

Philips MC-I200MC-I200 MC-i200 Getting Started, General information, Power, Basic audio setup

Models: MC-I200MC-I200