CLOCK/TIMER
Manual clock setting

5 Press CLOCK/TIMER on the unit to confirm the source.

English

SELECT

 

 

 

 

 

SOURCE

 

 

 

 

SHUFFLE

 

 

 

 

SIDE A/B

 

 

 

 

 

 

PROGRAM

 

 

 

REPEAT

DSC

INCREDIBLE

SURROUND

 

REVERSE

MODE

 

 

DBB

RDS/NEWS TAPE COUNTER

1

Switch to standby.

2

Press CLOCK/TIMER on the unit.

 

➞The clock digits flash.

3

Press 5 TUNING 6 on the unit to set the hour.

4

Press 4 PRESET 3 on the unit to set the minutes.

 

➞The symbol of the source and ON is displayed, the

 

 

clock digits flash.

6

Press 5 TUNING 6 on the unit to set the desired hour

 

and 4 PRESET 3 to set the desired minute.

7

Press CLOCK/TIMER on the unit to confirm the settings.

 

➞

is shown and the timer is armed.

 

 

BAND

CD

SYNCHRO

TIMER ON/OFF

RECORD

TUNING

 

 

PRESET

 

 

CLOCK/TIMER

Clock setting

You may set the clock by using a time signal which is broadcast with RDS stations. This only works if the RDS station is sending this signal.

Automatic clock setting

1Tune to an RDS station (see “RADIO”).

2Keep CLOCK/TIMER on the unit pressed for more than 2 seconds.

➞SEARCH RDS TIME is displayed for a maximum of 90 seconds. Then the time is displayed.

Note: If NO RDS TIME is displayed, no time signal has been received. In that case you will have to set the clock manually.

5 Press CLOCK/TIMER on the unit to confirm the settings.

Displaying the time

•When the unit is switched on, press CLOCK/TIMER to switch the time display on and off.

Timer setting

You may use the unit as an alarm clock, with the CD, tuner or tape switching on at a set time.

1Adjust the volume to be used for the alarm.

2Switch to standby.

3Keep CLOCK/TIMER on the unit pressed for more than 2 seconds.

➞TIMER flashes and the actual source is displayed.

4Press SELECT SOURCE on the unit to select the desired sound source: CD, TUNER or TAPE.

Note: REC TUN is only used for a timed recording. See “TAPE DECK” for details.

TIMER

Note: If more than 90 seconds elapses without a button being pressed, the unit quits the timer setting mode.

Timer deactivation and activation

•Press TIMER ON/OFF during standby, to switch the timer off and on.

➞If the timer is armed TIMER is shown.

8