Manual tune -> Auto scan local -> Auto scan full -> DRC value -> Sw version
3 To select an option, press 2; .
4 Repeat steps 2-3if sub-option is available under one option.
Press 4 / ¢ to scroll the menu options:
2
Selecting a preset DAB station
1 Press PRESET +/- ( 3 / 4 on the remote control ) to select desired preset station.
2 Press 2; to confirm the selection.
Note
– If you have not yet stored a DAB station in one of the presets, "Empty preset" will be displayed.The display will revert to the previously selected station after a few seconds.
Resetting to the factory setting
Resetting to the factory setting will delete all of the preset stations.
1 In standby mode, on the main unit, press and hold MENU and PRESET + simultaneously.
2 Then press 9 to reset.
Changing the DAB station information
On the display of DAB broadcasting, the first line shows a station name, and the second line shows the service information for the current station. 7 types of service information are available.
● Press INFO./RDS repeatedly to cycle through the display information.
Using the MENU control
The menu control lets you access the DAB radio setup options.
1 In DAB mode, press MENU to enter the menu options.
➜The first setup option "Manual tune" is displayed.
DAB Radio
Manual tune
By using this feature, it is possible to manually tune to a specific channel/frequency. In addition to antenna orienting for better radio reception, the optimal reception can also be obtained by using this feature.
1In DAB mode, press MENU to display "Manual tune" option.
2Press 2; to confirm the selection.
➜ Display shows a channel and its frequency.
3Press 4 / ¢ repeatedly until desired channel/frequency appears.
4Press 2; to confirm the selection.
●You may press INFO./RDS to change the service information on the display.
●You may adjust the position of the antenna to obtain the optimal signal strength.
Local scan and Full scan
Local scan is used to perform a small range of DAB radio search (in UK). Full scan is used to perform a wide range of DAB radio search (outside UK).
1In DAB mode, press MENU to enter the menu options.
2Press 4 / ¢ repeatedly until “Auto scan local” or “Auto scan full“ is displayed.
3Press 2; to confirm the selection. ➜The local or full scan starts.
