Clock/Timer
9
Setting the clock
1In standby mode, press and hold DISPLAY/ CLOCK on the remote control set for 2 seconds.
2Press PROG on the remote control to select
3Press DISPLAY/CLOCK to confirm. ➜ The clock digits for the hours flash.
4Press 4 / ¢ to set the hours.
5Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
6Press 4 / ¢ to set the minutes.
7Press DISPLAY/CLOCK to confirm the time.
Setting the timer
●The system can be used as an alarm clock, whereby the CD,TUNER or DAB is switched on at a set time.The clock time needs to be set first before the timer can be used.
1In standby mode, press and hold TIMER about 2 seconds on the remote control.
2Press SOURCE (or DISC/TUNER/DAB on the remote control) to select sound source.
3Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash.
4Press 4 / ¢ to set the hours.
5Press TIMER again.
➜ The clock digits for the minutes flash.
6Press 4 / ¢ to set the minutes.
7Press TIMER to confirm the time.
➜ The timer is now set and activated.
Note:
–If CD source is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.
Activating and deactivating
TIMER
●In standby or during playback, press TIMER once.
➜ Display shows 
if activated, and disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off by itself after a set period of time.
●During playback, press SLEEP on the remote control once or more.
➜Display shows 
and one of the sleep time options in sequence: 60, 45, 30,15, 0, 60... if you have selected a time.
●To deactivate, during playback, press SLEEP on the remote control once or more until “ 0“ is shown, or press STANDBY ON 2 (or 2 on the remote control).
➜
disappears from the display.
English
19
