17
English
EN

8 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
Note
•Make sure that you have set the clock correctly.
1 In standby mode, press and hold TIME/
SLEEP for more than two seconds.
» The hour digits are displayed and begin
to blink.
2 Press / (or +/-) repeatedly to set hour.
3 Press TIME/SLEEPtoconrm.
» The minute digits are displayed and
begin to blink.
4 Repeat steps 2-3 to set minute, select a
source (disc, USB, or tuner), and adjust
volume.
Note
•If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press TIME/SLEEP repeatedly to activate or
deactivate the alarm.
» If timer is activated, is displayed.
Tip
•If disc/USB source is selected, but no disc is placed or
no USB connected, the system switches to the tuner
source automatically.

Set the sleep timer

To set the sleep timer, in turn on mode, press
TIME/SLEEP repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer:
Press TIME/SLEEP repeatedly until [SLP OFF]
(sleep off) is displayed.
» When sleep timer is deactivated,
disappears.

Listen to an external device

You can listen to an external device through this
unit with an MP3 link cable (not supplied).
1 Make sure that the external audio device is
connected to this device (see "Connect an
external audio device").
2 Press FM/AUX repeatedly to select AUX
source.
3 Start to play the external device (see the
device user manual).