English
11
DB15 CONNECTOR
TO MAIN UNIT
SPEAKERS 4
AC MAINS ~
 1.000
Connections
IMPORTANT!
–The type plate is located at the rear of
the system.
–Before connecting the AC power cord
to the wall outlet, ensure that all other
connections have been made.
–Never make or change any
connections with the power switched on.
–High voltage! Do not open.You run the
risk of getting an electric shock.
–The machine does not contain any user-
serviceable parts.
–Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a
safety circuit has been built in. Therefore,
your system may switch to Standby
mode automatically under extreme
conditions. If this happens, let the system
cool down before reusing it (not available
for all versions).
Speaker
(right)
Speaker
(left)
FM antenna
AC power cord
Step 1: Placing speakers andsubwoofer
For best possible surround sound, locate your
speakers and subwoofer as follows:
●Place the left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
●Place the subwoofer on the floor.
Notes:
–To avoid magnetic interference, do not position
the front speakers too close to your TV set.
–Allow adequate ventilation around the DVD System.
pg001-pg038_MCD149-05-Eng 2007.9.13, 17:3211