Setting language preference, Connecting TV

Preparations

English

Step 3: Setting language preference

You can select your preferred language settings so that this DVD Micro System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead. But the menu language of the DVD Micro System cannot be changed once selected.

1In stop mode, press SYSTEM MENU.

2Press 22/33/5/4 on the remote control to select your preferred option.

➜Move to Language and press OK or 4.

➜Move to one of the following and press OK or 33.

OSD Menu (On-Screen Display)

Switches the display language on the TV screen. Select the language from the displayed list.

Subtitle (DVD only)

Switches the display language of the subtitle. Select the language from the displayed list.

Audio (DVD only)

Switches the display language of the sound track. Select the language from the displayed list.

Menu (DVD only)

Select the language for the DVD menu.

When the selected language is not recorded in the DVD, one of the recorded languages will be selected automatically (except for OSD).

You can reset all the DVD settings except for Rating.

If the language selected is not available on the disc, the original language designated by each disc will be selected.

3Press 5/4 to select a language and press OK.

4Repeat steps 2~3 for other settings.

To remove the menu

Press SYSTEM MENU.

IMPORTANT!

–Make sure you have completed all the necessary connections. (See Connections

–Connecting TV.)

Step 4: Setting video preference

Turn on the TV set and set it to the correct Video-In channel.

➜You may go to channel 1 on your TV set, then press the channel button repeatedly until you see the Video In channel.

➜Or, you can use the TV remote control to select different video modes.

➜Or, set TV to channel 3 or 4 if you are using an RF modulator.

1In the disc mode, stop playback and press

SYSTEM MENU.

2Press 22/33/5/4 on the remote control to toggle through the functions and select your preferential option.

➜Move to Video and press OK or 4.