Connecting speakers, Antennas Connection | Philips MCD510/21

English

Connections
		FM Antenna
	Step 2: Connecting speakers	FM Antenna

1 2

Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown.

Notes:

-Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

-For optimal sound performance, use the supplied speakers.

-Do not connect more than one speaker to any one pair of +/- speaker terminals.

-Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Step 3: Antennas Connection

Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.

MW Antenna

●Position the antenna as far as possible from a TV, VCR or other radiation source.

●For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.

12

Image 12

Philips MCD510/21 manual Connecting speakers, Antennas Connection, MW Antenna

Contents

DVD Micro Theatre México E a T H R E Windows Media is a trademark of Microsoft Corporation Index EnglishEspañol 111 Contents Clock/Timer Tape Operation/Recording Features Supplied accessoriesGeneral Information Discs for playback General Information/Maintenance Care and safety informationEnvironmental information Cleaning the disc lens Cleaning the head and the tape pathsFinding a suitable location Demagnetising the head Connections RightLeft Placing speakers Connecting speakers Antennas ConnectionMW Antenna Connecting TV English Using S-Video In jack Using an accessory RF modulator Connecting the power cord Optional Connecting additional equipmentConnecting an active subwoofer B Using the VCR for recording DVDs C Controls Controls on the remote control Controls on the system System Menu disc mode only Disc Menu disc mode only$ DBB Dynamic Bass Boost § OK Switching the system on Listening through headphonesSwitching the system to Eco Power Standby mode Power-saving automatic standby Basic Functions Microphone MixingKey Control Echo Inserting batteries into the remote control Setting the clockUsing the remote control to operate System Preparations Setting language preference Setting video preferenceConnecting TV To remove the menu Press System Menu TV Shape TV SystemVideo Out Pr/Cr Pb/Cb Y Using the disc menu Disc OperationsPlaying discs Basic playback controls English Fast search Programming favorite tracksFor CD/VCD/SVCD Special disc features Playing MP3/ WMA/picture disc Kodak, Jpeg Mixed-mode disc Jpeg Using the system menu Setting language preferenceSetting video preference DVD only Setting audio English Night Mode turning On / Off Setting RatingOff Use the Numeric Keypad 0-9 to enter the four-digit code To change the password To play discs of rating control DVD onlyTo remove the menu Tuning to radio stations Radio ReceptionProgramming radio stations Automatic programming Tuning to preset radio stations Changing tuning grid not available for Tape Operation/Recording Tape playbackRewinding / Fast forwarding General information on recording Recording timer When recording is in progressPreparation for recording Synchro start CD recording for CD only Clock/Timer Clock settingTimer setting Sleep timer setting Specifications Troubleshooting ProblemSolution Check that the speakers are connected correctly Glossary