Philips MCD5110 user manual Place the unit, Connect speakers, Connect FM antenna

Models: MCD5110

1 30
Download 30 pages 58.75 Kb
Page 10
Image 10
3 Connect

3 Connect

Place the unit

1Place the unit near the TV.

2Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position.

Place the unit Note

•• To avoid magnetic interference or unwanted noise, never place this apparatus and speakers too close to any radiation devices.

•• Place this unit on top of a table.

•• Never place this unit in an enclosed cabinet.

•• Install this unit near the AC outlet where the AC power plug can be easily reached.

Connect speakers

Connect speakers Note

•• For optimal sound, use the supplied speakers only.

•• Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual.

8EN

1Hold down the socket flap.

2Insert the stripped part of the wire completely.

Insert the right speaker wires to "R", left speaker wires to "L".

Insert the red wires to "+", black wires to "-".

3Release the socket flap.

Connect FM antenna

Connect FM antenna Tip

•• For optimal reception, fully extend and adjust the position of the antenna.

•• For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL socket.

•• The device does not support MW radio reception.

Connect the supplied FM antenna to the FM AERIAL socket on the back of the device.

Page 10
Image 10
Philips MCD5110 user manual Place the unit, Connect speakers, Connect FM antenna