Turn on
•Press .
»»The device switches to the last selected source.
Switch to standby mode
•Pressagain to switch the unit to standby mode.
»»The clock (if set) is displayed on the panel.
To switch to ECO standby mode:
•Press and holdfor more than two seconds.
»»The display panel is dimmed.
Note
•• The unit switches to Eco Power Standby mode after 15 minutes in standby mode.
To switch between standby mode and ECO standby mode:
•Press and hold for more than two seconds.
Find the correct viewing channel
1Press DISC to switch to disc mode.
2Turn on the TV and switch to the correct
•Go to the lowest channel on your TV, and then press the Channel Down button until you see the blue screen.
•Press the source button repeatedly on the remote control of your TV.
Tip
•• The
Select the correct TV system
Change this setting if the video is not displayed correctly. By default, this setting matches the most common setting for TVs in your country.
1Press .
2Select [Setup] (Setup)
3Select a setting and press OK.
•[PAL] (PAL) - For TV with PAL color system.
•[Multi] (Multi) - For TV that is compatible with both PAL and NTSC.
•[NTSC] (NTSC) - For TV with NTSC color system.
4To return to the previous menu, press .
5To exit the menu, press .
Change system menu language
1Press .
2Select [Setup] (Setup)
3Select a setting and then press OK.
4To exit the menu, press .
12EN