Connections
Step 2: Connecting TV
IMPORTANT!
–You only need to make one video
connection from the following options, depending on the capabilities of your TV.
–Connect the DVD system directly to the TV.
Using Composite Video jack
1Use the supplied composite video cabel (yellow) to connect the DVD system's VIDEO OUT jack to the video input jack (or labeled as A/ V In,
CVBS, Composite or Baseband) on the TV.
2To hear the TV channels through this DVD system, use audio cables (white/red) to connect AUX IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV..
Using Component Video jacks (Y Pb Pr)
IMPORTANT!
–The progressive scan video quality is only possible when using Y Pb Pr, and a progressive scan TV is required.
1Use component video cables (red/blue/green - not supplied) to connect the DVD system's Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.
2To hear the TV channels through this DVD system, use audio cables (white/red) to connect AUX IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV.
3If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual. For DVD system Progressive Scan function, see “Getting Started- Setting up Progressive Scan feature”.
Note:
–If your TV does not support Progressive Scan, you will not be able to view the picture.
Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.
English
9
