Play, Set clock, Basic play operations | Philips MCM1120 instruction

Note

•• When the unit remains idle for 15 minutes, it switches from standby mode automatically.

Set clock

1 In standby mode, press and hold CLOCK on the remote control for more than two seconds.

»»[24H] or [12H] hour format is displayed.

2 Press / to select [24H] or [12H] hour format.

3 press CLOCK to confirm.

»»The hour digits are displayed and begin to blink.

4 Repeat steps 2-3 to set hour and minute.

Note

•• If no button is pressed in 90 seconds, the system exits clock setting mode automatically.

Tip

•• You can view clock information in power-on mode by pressing CLOCK.

You can control play through following operations.

Key	Function
/	Press and hold to fast-forward/fast-
	reverse the track during playback,
	then release to resume play.
	To pause/resume play during
	playback.
DISPLAY	Select different play information.
REPEAT	To select a repeat play mode:
	[REP] (repeat): play current track
	repeatedly.
	[REP ALL] (repeat all): play all
	tracks repeatedly.
	Press again to return to normal
	play.
SHUFFLE	To play tracks randomly.
	Press again to return to normal
	play.

1 Press CD on the remote control to select the disc source.

2 Press on the top of the main unit.

»»The disc door opens.

3 Place a disc face up onto the tray and press again.

»»Play starts automatically.

EN 9