Philips MCM166 user manual Connect speakers, Connect power

3 Connect	Connect power
Connect speakers

Note

•Insert the stripped portion of each speaker wire into the socket completely.

•For optimal sound, use the supplied speakers only.

•Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifi cations section of this manual.

To insert each speaker wire: Hold down the socket fl ap. Insert the speaker wire fully. Release the socket fl ap.

1For the right speaker, fi nd the sockets on the main unit marked ‘RIGHT’.

2Insert the red wire to the red (+) socket.

3Insert the black wire into the black (-) socket.

4For the left speaker, fi nd the sockets on the main unit marked ‘LEFT’.

5Repeat steps 2-3.

Caution

•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Micro Hi-Fi.

•Before connecting the AC power cord, ensure you have completed all other connections.

1 Connect the AC power cord to the wall socket.

10EN