4 Get started
Caution
•Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of your Micro
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
To replace the remote control battery:
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
3Close the battery compartment.
3 1
2
Note
•Before pressing any function button on the remote control, fi rst select the correct source with the remote control instead of the main unit.
•If you are not going to use the remote control for a long time, remove the batteries.
Auto install radio stations
When you connect the Micro | English |
| |
power supply for the fi rst time, or no radio |
|
station is stored in this Micro |
|
Play is activated to store all available radio |
|
stations automatically. |
|
1Connect the Micro
»[AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed.
2 Presson the main unit to start installation.
»[AUTO] (auto) is displayed.
»The Micro
»When all the available radio stations are stored, the fi rst preset radio station is broadcast automatically.
Set clock
1Press and hold CLOCK/DISPLAY to activate the clock setting mode.
»The 12 hour or 24 hour format is displayed.
2Press PROG repeatedly to select 12 hour or 24 hour format.
3Press CLOCK/DISPLAY to confi rm.
»The hour digits are displayed and begin to blink.
4 Press/ to set the hour.
5Press CLOCK/DISPLAY to confi rm.
»The minute digits are displayed and begin to blink.
6 Press / to set the minute.
7Press CLOCK/DISPLAY to confi rm.
EN 11