Philips MK6000 manual Voice recognition, Streaming audio

Sending DTMFs

•During a call, you can send DTMFs (Dual-Tone Multi-Frequency) for touch-tone dialling. This feature can be used for managing your voicemail, for example.

•Press the scroll wheel - the kit says «0».

•Turn the wheel to scroll through the numbers.

•Press the scroll wheel to send the selected number to the phone.

•Repeat this sequence for sending other DTMFs.

Clearing the memory

•You can pair up to five devices.

•If you attempt to pair a sixth device, the kit says «memory full».

•To pair a new phone, you must clear the memory by holding down both the green and red buttons for three seconds.

CAUTION: doing so also clears all the contacts and the associated voiceprints.

Note: the use of certain features (voice recognition, redial, discreet mode) depends exclusively on your phone. Refer to the Support heading on our website at www.parrot.com for further information.

Voice recognition

Recording keywords and magic words

To offer you as many features as possible, the Parrot MK6000 lets you record keywords: «gene-

ral», «mobile», «work», «home», «other», as well as magic words: «phone» and «hang up».

The magic word «phone» lets you accept an incoming call, as well as start the voice recognition feature. The magic word «hang up» lets you terminate a call.

In the event of a contact with several phone numbers, the keywords allow you to choose the number to call.

•Click on the central scroll wheel and turn it until the kit says «Record keywords», and then confirm.

•The kit says «Record all keywords».

•If one or more keywords are already recorded, the kit selects the first keyword that has not yet been recorded.

•Press the central scroll wheel or the green button to start recording. Follow the prompts given by the kit. You will need to record each keyword twice for greater recognition.

•When a keyword is correctly recorded, the kit automatically goes to the next. Otherwise, it prompts you to record it again.

•As soon as all keywords are correctly recorded, the kit enables them automatically.

•You can exit the menu at any time by pressing the red button and then go back to record or modify the keywords whenever required.

•If you do not wish to record all the keywords, turn the scroll wheel to select the required word.

Saving contacts in the Parrot MK6000

To use the voice recognition feature of the Parrot MK6000, you must send the contacts by Bluetooth from your phone to the kit. Proceed as follows:

•Return to the «Add voiceprints» menu.

•Press the scroll wheel or the green button: the Parrot MK6000 and the phone disconnect the kit is now ready to receive contacts.

•On your phone, select the contacts and send them by Bluetooth (refer to your phone’s user guide or our website).

•Select Parrot MK6000 from the list (enter 0000 as the PIN code if prompted by your phone).

•Once received, the kit asks you to record the name corresponding to the contact. The voice print is assigned to the contact.

Note: the use of certain features (voice recognition, send contacts by Bluetooth) de- pends exclusively on your phone (support of the Hands-free or Headset profile). Refer to the Support heading on our website at www.parrot.com for further information.

Streaming audio

The streaming audio feature lets you play the music tracks recorded on your Bluetooth audio player over the vehicle’s speakers. This feature depends on your audio player. Some phones also incorporate this feature. For further information, refer to our website: www.parrot.com

Prior to using the Parrot MK6000 with your audio player, you will need to pair both devices.

English

Parrot MK6000

11