E n g l i s h
Digital Out Set up the Digital Audio output for a 5.1 Receiver/Decoder. This menu enables you to set the type
of 5.1 output according to your Decoder/Amplifier. The form of each type of Data (Dolby Digital, MPEG or DTS) can be set as a Bitstream or PCM format to suit your Dolby & DTS decoders.
[ Digital out ]
Parental Control
Some DVD discs have a parental level assigned to the disc. The range of parental controls is from 1 to 8. The meaning of the levels 1 to 8 varies depending upon the country and the type of content on the disc.
The player can be set in a similar way. If the player’s parental level is set to 8, it will play all discs. If the player’s parental level is set below 8, only discs with a lower or equal level will play. For example, if the player is set to 5, only discs with parental control ratings of 5, 4, 3, 2 & 1 will play. To play a higher rated disc, you must change the player’s rating to a higher number.
Alternative scenes with a lower rating might be included. The player plays the highest rated scene that the parental setting allows. For example, consider a disc that generally is suitable for most audiences, and it is rated as level 2 for the most part. However, in the middle, there are also scenes rated at 5 (not suitable for children).
The player is delivered without a password. When you set the parental level for the first time, you are invited to enter your own password (e.g. 1, 2, 3, 4). This becomes the password for the player. You must know this password in order to change it. Some films do not have parental control, the disc will play regardless of the player setting.
Parental Lock password erase
1Press and hold FREQUENCY 3 on the front panel
while unplug and
➜ “PAS ERASE” will be displayed.
2Wait until “PASSWORD ERASE OK” appear on the TV display, the player will then switch to standby mode 20 seconds later.
Parental Control Example showing how to set parental level to 3. |
|
| |
[ Parental ] | [ Level ] | or | < 3 > |
|
| ||
[ Return ]
X 4
[4 digits password ] 
