Connections
Rear Panel
1 | 2 | 3 | 4 | 5 |
0 | 9 | 8 | 7 | 6 |
E n g l i s h
IMPORTANT!
–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
–Never make or change any connections with the power switched on.
–The type plate is located at the rear of the system.
1ANTENNA
FM Antenna
2AUDIO IN
For connecting analogue (Left/Right) audio signals from external sources to the unit.
VCR – connect to Video Cassette Recorder AUDIO OUT terminal
TV – connect to Television AUDIO OUT terminal CDR – connect to CD Recorder AUDIO OUT
terminal
3VIDEO IN
For FM reception, connect the FM antenna to the FM terminal. Move the antenna in various directions until the clearest signal is received.
AM Loop Antenna
For AM reception, connect the AM loop antenna to the AM terminal. Position the loop antenna to receive the clearest sound.
1 |
2
●Fully insert the stripped portion of the antenna into the terminals as shown.
Note:
– Position the antenna as far as possible from a TV,VCR or other radiation source.
For connecting to the corresponding VIDEO OUT terminal on a VCR, TV or CDR.
4DIGITAL OUT (in DVD/CD mode only)
Digital Coaxial Output RCA terminal
For connecting to external equipment that has a digital COAXIAL IN terminal.
Digital Optical Output terminal
For connecting to external equipment that has a digital OPTICAL IN terminal.
5SCART OUT
For connecting to the SCART IN terminal on the TV using the supplied scar t cable.
Audio Out on/off switch
For switching on or off the audio signal from the AV CONNECTOR to your TV.
6VIDEO OUT
For connecting to external equipment with VIDEO IN terminals for viewing or recording.
REC – connect to VCR or other recording device MON– connect to TV or Monitor
CONNECTIONS 9
