pg 01-25/MX36-37xx/37-Eng
22
Notes:
– If you attempt to program more than 40 preset radio stations, "FULL" is displayed.
– During programming, if no key is pressed within five seconds, the system will exit the program mode automatically.
22 OTHER FUNCTIONS
Repeat
steps 1–4to store other radio stations.
●
Press PROGRAM again to store the radio station.
4
Program
3 Use the numeric keypad (0-9)to select the desired preset number.
Program
Note:
– If “Program” icon goes off before you select the desired preset number, press PROGRAM again.
Press PROGRAM.
➜ “Program” appears.
2
Tune to your desired radio station (refer to “Tuning to radio stations”).
1
station.
Presetting radio stations
You can preset up to 40 stations regardless of the reception.
Repeat
if necessary until you find the desired radio
step 4
5
mode.
3 Press TUNER again to select the desired band : FM or AM.
4 Press and hold S or T until the frequency indication starts to change, then release.
➜ The system automatically tunes to the next strong radio station.
● To tune to a weak station, press S or T briefly and repeatedly until an optimal reception is found.
Adjust SOURCE (or press TUNER) to select TUNER
2
Press STANDBY ON to switch on the last selected source.
1
Other Functions
Tuning to radio stations
Listening to preset radio stations
●In tuner mode, press 1 or 2 or use the numeric keypad (0-9)to select the desired preset number.
➜ The preset number, radio frequency, and waveband are displayed.
Sleep timer setting
The sleep timer enables the system to switch to standby mode automatically at a preset time.
1Press SLEEP repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...
2When you reach the desired length of time, stop pressing the SLEEP button.
➜“Sleep” icon appears.
To check the remaining length of time after sleep timer is activated
●Press SLEEP once.
To change the preset sleep timer
●Press SLEEP again while the remaining sleep timer is shown.
➜ The display will show the next sleep timer options.
To deactivate the sleep timer
●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.
4/18/02, 5:56 PM
