16:9
(Wide screen)
4:3 LB (Letter Box)
4:3 PS (Pan Scan)
Note:
–If your DVD is not encoded to allow you to change the aspect ratio,TV shape cannot be changed.
–TV System
Allows you to select the color system matching the connected TV set.
AUTO (default setting)
–If the connected TV is multi system, select this mode. The output format will be in accordance with the video signal of the disc.
NTSC
–If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format.
PAL
– If the connected TV is PAL system, select this mode.
It will change the video signal of a NTSC disc and output in PAL format.
–Video Out
Video out selection enables you to choose the type of video output suitable for your receiver.
¶Select PR PB Y (default setting), if you have connected the video output to your TV using the Component Video Out (Pr/Cr Pb/Cb Y) jacks.
¶SCART (this feature is not available for this model)
¶Select
–Screen Saver
If set to ON, when you leave the system in stop or pause mode for more than one minute, the screen saver will be activated. The default setting is OFF.
Setting the sound 
–Digital Output
Digital output selection enables you to specify the type of digital output suitable for your amplifier or receiver.
¶Select ALL (default setting), if you have connected the digital output (COAXIAL or OPTICAL) to a multichannel decoder receiver.
¶Select PCM 96K if the external component is capable of processing digital signal input with sampling rates of 96 kHz.
¶Select PCM 48K if the external component is incapable of processing 96 kHz digital signal input, then convert to standard signal with sampling rates of 48 kHz.
¶Select OFF to deactivate the digital output (COAXIAL or OPTICAL).
–Night Mode
Set night mode to on to level out the volume. For example, the disc will play at the same sound level throughout the movie. The default setting is OFF.
Night function can also be accessed via the remote control.
–Center Delay
If the listening position is closer to the center speaker than the front speakers, you can set the center delay time to improve the surround sound effect.
Options : 5ms, 3ms, 2ms, 1ms or OFF (default setting).
–Rear Delay
If the listening position is closer to the rear surround speakers than the front speakers, you can set the rear delay time to improve the surround sound effect.
Options : 15ms, 12ms, 9ms, 6ms (default setting), 3ms or OFF.
–Test Tone (disc mode only)
If set to ON, the system will test the speaker settings. The test signal is generated through the left, center, right, and surround speakers.The default setting is OFF.
E n g l i s h
PREPARATIONS 13
pg | 13 | 4/18/02, 5:55 PM |
