Philips MX2500D Connecting FM/MW, Connecting the, antennas, power cord, Connections, En gli sh

En gli sh

Connections

Step 4: Connecting FM/MW	Step 5: Connecting the
antennas	power cord

fix the claw into	1
the slot	MW
	antenna

➠	1
	FM
	antenna

2

2

FRONT FRONT FRONT REAR REAR SUBWOOFER RIGHT LEFT CENTER RIGHT LEFT

~ AC MAINS

Power Outlet

1Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.

2Connect the supplied FM antenna to the FM (75Ω ) jack. Extend the FM antenna and fix its ends to the wall.

For better FM stereo reception, connect an external FM antenna (not supplied).

Helpful Hints:

–Adjust the position of the antennas for optimal reception.

–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.

10

After everything is connected properly,

1Set the VOLTAGE SELECTOR to the local power line voltage.

2Plug in the AC power cord to the power outlet.

Never make or change any connections with the power switched on.

Helpful Hint:

– Refer to the type plate on the rear or bottom of the system for identification and supply ratings.

001-035-MX2500D-78-Eng2 10 7/20/04, 3:11 PM 8239 300 32892