Philips 78 Playing a disc, No picture?, Using the DVD setup menu, Make sure your DVD system and

Playing a disc

1 ALL

4	CH
	AN
	NEL
	3

3		Make sure your DVD system and	2
		TV are connected and turned on!
1	1	Press DISC on the remote control.
		You can also press the SOURCE button on the front panel
		until “DISC” appears on the display panel.
	2	Turn on the TV and select the correct Video
		In mode.
		You should see the blue DVD background screen on the TV
4		(if no disc in the DVD system).
	3
5		Press OPEN/CLOSE 0 on the front of the
		DVD system and load a disc, then press

OPEN/CLOSE 0 again to close the disc tray. Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.

4 Press ÉÅ to start playback.

If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the instructions given in the disc menu.

5 To stop playback, press STOPÇ.

No picture?

Check the AV (Audio/Video)

mode on your TV.

*Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO.

*Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

*Or, your TV remote control may have a button or switch that chooses different video modes.

*Do not use channel 3 or 4 on the TV unless you are using an RF modulator.

*See your TV manual for more details.

Using the DVD setup menu

➠ ➠

TV SHAPE

TV SYSTEM

VIDEO OUT

➠ SCR SAVER

DIGITAL OUT

NIGHT MODE

CNTR DELAY

REAR DELAY

TEST TONE

1	AUDIO
	SUBTITLE
	DISC MENU
2

PARENTAL

PASSWORD

MENU LANG

DEFAULTS

Detailed playback features and additional functions are described in the

accompanying owner’s manual.