Philips MX3950D, MX3900D Setting the TV, Changing the NTSC/PAL setting via the remote control

Step 3: Setting the TV

IMPORTANT!

Make sure you have completed all the necessary connections. (See pages 12-13 “Connecting TV”.)

1Adjust SOURCE control until “DISC X” appears on the display panel (or press DISC/MEDIA on the remote.)

2Turn on the TV and set to the correct video-in channel. You should see the blue Philips DVD background screen on the TV.

➜Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.

➜Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

➜Or, the TV remote control may have a button or switch that chooses different video modes.

➜Or, set the TV to channel 3 or 4 if you are using an RF modulator.

Changing the NTSC/PAL setting via the remote control

DISC/

TV/AV MEDIA TUNER AUX/DI

1, 2

1 2 3

4 5 6

1Press DISC/MEDIA on the remote to enter disc mode.

➜Make sure no MP3 or picture (Kodak, JPEG) disc is in disc tray 1.

➜Wait until the system finishes reading the

discs before proceeding to next step.

If playback begins, press Ç to stop playback.

2Press and hold DISC/MEDIA on the remote until “PAL” or “NTSC” appears on the display panel.

➜ To change the setting, repeat step 2.

Getting Started

Selecting the color system that corresponds to your TV

This DVD system is compatible with both NTSC and PAL. In order for a DVD to play on this DVD system, the color system of the DVD, the TV and the DVD system should match.

		SYSTEM MENU	DISC MENU
	1
2 ,	3	SEATING	ZOOM
SETUP MENU	4	PREV	NEXT
➠			OK
		STOP	PLAY/PAUSE
TV Shape
TV System	Auto
Video Output	NTSC
Screen Saver	PAL

Set TV system

1In disc mode, stop playback and press SYSTEM MENU.

2 Selecticon and press 4.

3Use the joystick (1 2 3 4) on the remote to navigate in the menu.

Move to and press 2.

Move to ‘TV System’ and press 2.

Auto – Select this if the connected TV is compatible with both NTSC and PAL (multi- system.) The output format will be in accordance with the video signal of the disc.

NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output to NTSC format.

PAL – Select this if the connected TV is PAL system. It will change the video signal of an NTSC disc and output to PAL format.

4Select an item and press OK.

To remove the menu Press SYSTEM MENU.

19

English

pg 001-044_MX39-37-Eng1 19 2/25/03, 10:28 AM 3139 115 21993