XP
CD PLAYER
English
5Press TIMER or PROGRAM again.
™ The clock digits for the minutes flash.
6Turn VOLUME to set the minutes: clockwise for minutes up;
7Press TIMER or PROGRAM to confirm the time.
– The timer is now set and activated.
Activating and deactivating TIMER
Press either:
•on the remote control,
TIMER during playback or in standby mode;
•on the set,
PROGRAM in standby mode.
™Display shows ˚ if activated, and disappears if deactivated.
Activating and deactivating SLEEP
The sleep timer enables the unit to switch off by itself after a set period of time. The clock time needs to be set first before the sleep timer can be used.
•During playback to select and activate your desired sleep time, press SLEEP on the remote control once or more.
™Display shows SLEEP and one of the sleep time options in sequence: 60, 45, 30, 15, SLEEP OFF, 60...
•To deactivate, press SLEEP on the remote control once or more until SLEEP OFF is shown, or press to standby on the set or remote control.
™SLEEP disappears from the display.
MC158 COMPACT | |
| AUDIO SYSTEM |
| OPEN |
| CLOSE |
CD | D B B |
| |
SHUFFLE |
|
PROGRAM |
|
| PRESET |
| TUNING |
Playing a CD
This CD player plays Audio Discs including
•
1Select CD source.
2Press OPEN/CLOSE to open the CD tray.
™OPEN is displayed when you open the CD compartment.
3Insert a CD with the printed side facing up and press down on OPEN/CLOSE to close the CD tray.
™READ is displayed as the CD player scans the contents of a CD, and then the total number of tracks and playing time are shown.
™NO DISC is displayed if you have inserted no disc.
™DISC NOT READABLEscrolls across the display if you insert a CD incorrectly or a non finalised
4Press 2; to start playback.
™Current track number and elapsed playing time of the track are displayed during CD playback.
5To interrupt playback press 2;. Press 2; again to resume playback.
™The display freezes and the elapsed playing time flashes when playback is interrupted.
6To stop CD playback, press 9.
Note: CD play will also stop when:
–the CD tray is opened;
–the CD has reached the end;
–you select another source: TAPE, CD RW or AUX.
Selecting a different track
•Press ¡1 or 2™ on the set, (on the remote control ¡ or ™) once or repeatedly until the desired track number appears in the display.
•If you have selected a track number shortly after loading
a CD or in the PAUSE position, you will need to press 2; to start playback.
Finding a passage within a track
1Press and hold down on ¡1 or 2™ (on the remote control 11 or 22 ).
–The CD is played at high speed and low volume.
2When you recognize the passage you want, release 11 or 22.
–Normal playback continues.
Note: During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within the same track.
12
