Philips NP2500/37B quick start NP2500 searches for networks, Select Yes to connect to the Internet

CConnect the player to a home network

Here is how to create a wireless connection to your home network with broadband Internet access

The onscreen display guides you through the process of connecting the player.This section describes the typical wireless setup with automatic IP address. For information on different setups, consult the user manual.

1Ensure that your network name and network password or encryption key are available.

2Turn on your wireless access point or wireless router with broadband Internet access.

3 Follow the steps in section (B) and select [Yes], to create a connection to the network.

4Select [Wireless (WiFi)] to start the network setup process.

•For wireless routers with Wi-Fi protection system (WPS) that supports push button configuration (PBC): On the router, press the WPS PBC push button (often displayed as ) to activate. On NP2500 press OK to confirm.

•For wireless routers with Wi-Fi protection system (WPS) that supports a personal identification number (PIN): On NP2500 select WPS PIN, then enter the displayed PIN on the router.

•For other wireless routers:

>> NP2500 searches for networks.

5Select your network from the list of found networks and confirm.

6 Enter the encryption key (if required) and confirm.

(press CLEAR to delete last character entry / press hold CLEAR to delete line entry)

>>The player

acquires the automatic IP address;

shows the confirmation for the connection to the network;

shows the prompt for the connection to the Internet.

7Select [Yes] to connect to the Internet.

>> The player shows the confirmation for the connection to the Internet.

You can go to section Enjoy and listen to Internet radio at this point.

This icon indicates steps on your remote control!

en

7