Philips NP2900 user manual First-time setupWired connection with automatic IP address

Note

•• You can enter more than one encryption key. In this case, NP2900 prompts you to select the default encryption key.

First-time setup:Wired connection with automatic IP address

This is how to navigate and select with the remote control:

• Press or to select a menu option.

• Press OK to confirm a selection.

• Press BACK to go back to the previous screen.

• Press HOME to go to the Home menu.

The alphanumeric buttons of the remote control are multi-function buttons:

• To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of NP2900.

• To cycle through the alphanumeric characters that are available, press a button repeatedly.

• To delete the last character entry from the display, press CLEAR.

• To delete the whole last line entry from the display, press and hold

CLEAR.

The onscreen display guides you through the process of connecting NP2900 to your home network and the Internet. This section describes the typical wired setup with automatic IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.

1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2900 and the Ethernet jack of the wired router.

2 Ensure that the wired router is turned on and has broadband Internet access.

3 Follow the steps in chapter First-time connection to home network until NP2900 shows the prompt for the network setup.

4 Select [Wired (Ethernet)] to start the network setup process.

»» NP2900 acquires the automatic IP address.

»» NP2900 shows the confirmation for the connection to the network.

»» NP2900 shows the prompt for the connection to the Internet.

5 Select [Yes] to connect to the Internet. »» NP2900 shows the confirmation for

the connection to the Internet.

First-time setup:Wired connection with static IP address

This is how to navigate and select with the remote control:

•Press or to select a menu option.

•Press OK to confirm a selection.

•Press BACK to go back to the previous screen.

•Press HOME to go to the Home menu.

The alphanumeric buttons of the remote control are multi-function buttons:

•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of NP2900.

•To cycle through the alphanumeric characters that are available, press a button repeatedly.

•To delete the last character entry from the display, press CLEAR.

•To delete the whole last line entry from the display, press and hold

CLEAR.

16EN