Philips NP2900 user manual Select Wired Ethernet to start the network setup process

The onscreen display guides you through the process of connecting NP2900 to your home network and the Internet. This section describes the typical wired setup with static IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.

1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2900 and the Ethernet jack of the wired router.

2 Ensure that the wired router is turned on and has broadband Internet access.

3 Follow the steps in chapter First-time connection to home network until NP2900 shows the prompt for the network setup.

4 Select [Wired (Ethernet)] to start the network setup process.

»» NP2900 tries to acquire an automatic IP address.

»» Press BACK to enter your IP address manually.

5 Enter your static IP address and confirm. »» NP2900 shows the confirmation for

the connection to the network.

»» NP2900 shows the prompt for the connection to the Internet.

6 Select [Yes] to connect to the Internet. »» NP2900 shows the confirmation for

the connection to the Internet.

English

EN 17