• To delete the last character entry from the display, press CLEAR.
• To delete the whole last line entry from the display, press and hold
CLEAR.
The onscreen display guides you through the process of connecting NP2900 to your home network and the Internet. This section describes the typical wired setup with static IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.
1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2900 and the Ethernet jack of the wired router.
2 Ensure that the wired router is turned on and has broadband Internet access.
3 Turn on NP2900.
4 Press SETTINGS, to go to the Settings menu.
5 Select [Wired (Ethernet)] to start the network setup process.
»» NP2900 tries to acquire an automatic IP address.
»» Press BACK to enter your IP address manually.
6 Enter your static IP address and confirm. »» NP2900 shows the confirmation for
the connection to the network.
»» NP2900 shows the prompt for the connection to the Internet.
7 Select [Yes] to connect to the Internet. »» NP2900 shows the confirmation for
the connection to the Internet.
English
»» Press BACK to go back to the previous screen.
Registration of NP2900 requires a valid email address and mailbox access.
This is how to navigate and select with the remote control:
• Press or to select a menu option.
•Press OK to confirm a selection.
•Press BACK to go back to the previous screen.
•Press HOME to go to the Home menu.
EN 31