Philips NP2900 user manual Technical data

11 Technical data

General

AC Power Voltage information is

	printed on the back or
	the underside of NP2900.
DC Power	12 V / 3.5 A
Dimensions (w x 346.5 x 99 x 69 mm
h x d)
Weight (net)	Main unit: ~ 1,48 kg
Power consumption
On		< 40 W
Standby (active)		< 4 W
ECO (passive) standby		< 1 W
Audio output
SPDIF	1x chinch (coax), 0.5 V,
	75 Ω
Headphones	1x 3.5 mm jack
	30 - 18,000 Hz
	16 - 150 Ω
Signal to noise ratio typically 85 dBA (IEC)
(headphones)
Distortion (line out	< 0.15 %
/ headphones)
Audio input
Aux in (line in)		2x cinch
Input sensitivity		500 mV
Input impedance		> 10 kΩ

Loudspeakers

Power	Front speakers: 10 W (RMS) /
handling	15 W (MPO)
	Side speakers: 6 W (RMS) / 9

W(MPO)

Impedance Front speakers: 8 Ω Side speakers: 12 Ω

Sensitivity	Front speakers: 80 dB / 1 m /
	W
	Side speakers: 83 dB / 0.5 m
	/ W
Dimensions	Front speakers: 2.56 inches
	Side speakers: 1.56 inches
Frequency	Front speakers: 50 Hz - 16 kHz
response	Side speakers: 500 Hz - 16 kHz
Wireless
Wireless	802.11g, backwards compatible to
standard	802.11b
Wireless	WEP (64 or 128 bit),
security	WPA/WPA2 (8-63 characters)
	WPS-PBC
	WPS-PIN
Frequency	2412 - 2462 MHz (CH1-CH11)
range	(for /79, /37, /55, /97)
	2412 - 2472 MHz (CH1-CH13)
	(for /12, /05)
Antenna	2x internal, diversity mode
	enabled
Wired (LAN / Ethernet)
Wired standard		802.3 / 802.3 u
Speed		10 / 100 MBit/s
Mode		half / full duplex
Crossover detection		Yes (Auto MDIX)
(Auto MDIX)

36EN