Erasing messages
Erasing individual messages
Press the r key on the handset.
The display shows the day, time and the number of messages received. The memo recorder plays back the messages automatically.
While listening to the messages, press x when the memo recorder plays back the message you want to erase.
A beep confirms that the message has been erased. The number of the received messages displayed is updated automatically.
Erasing all the messages received
Press r , then s . Press and hold x for 2 seconds.
A beep confirms that all the messages have been erased.
Personalising your memo recorder
If you have recorded an outgoing message and set the day and time, your memo recorder is ready for use. However, you can also personalise the settings on your memo recorder.
The following settings are available:
ïDefine a remote control code (5&& )
See ìEntering a remote control codeî on page 16.
ïChoose the number of times the telephone rings before your memo recorder
picks up (Number of rings).
See ìChanging the number of ringsî on page 17.
ïDecide whether your callers can leave a message ( 5(&25' 212))). See ìSwitching message record on or offî on page 18.
Entering a remote control code
You need to enter a code in order to be able to use your memo recorderís remote control functions from another telephone e.g. to listen to your messages from a telephone outside your home.
Press R, then press - until you reach $16: 6(783. Press o.
Press - until you reach 5&&, then press o.
!Enter your 4 digit code (e.g. 1234), then press o.
The handset beeps to confirm the code.
"Press R to exit menu mode.
16 | Your Onis Memo recorder |