Using advanced functions

Inserting automatic dialling pauses

You can set your Oniso to automatically insert a pause after the first dialled digit. This function applies to external calls only.

￿Press R, then press +to display 6(783. Press otwice.

Press -or +to select either 21 or 2)). Press o.

The handset beeps if the automatic insertion mode is changed.

!Press Rto leave menu mode.

Registering a new handset with your base station

To register a new handset with your base station, proceed as follows:

￿Unplug the power cable from the base station, then plug it in again.

The base station beeps to indicate that it is now in registration mode.

It is also possible to set the base station to registration mode using a handset that has already been registered. Instead of step 1 above, proceed as follows:

1. Press R, then press +to display 6(783. Press o.

2. Press -until$'' +6 is displayed. Press o.

3. Enter the registration code (this is given on a sticker labelled ìRCî under the base station). Press

o.

Your handset beeps to indicate that the base station is now in registration mode.

Move the handset to be registered close to the base station and press Rto enter menu mode.

!Press +to display 6(783, then press o.

"Press -until 5(*,67(5 is displayed, then press o.

&2'(" is displayed.

#Enter the registration code (this is given on a sticker labelled ìRCî under the base station). Press o.

The handset will search for a base station that is in registration mode. After a few seconds, the name of the base station will be displayed. In this case go to the next step.

If the handset cannot find a base station, )$,/(' will be displayed and you will need to try again.

Using advanced functions

25