5Listen to DAB radio stations
Note
•• For optimal reception, fully extend the antenna and adjust its position.
•• You can program a maximum of 30 DAB radio stations.
•• Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area.
For the first time use
1Turn the SOURCE knob to switch the product to DAB mode.
2Turn the 
knob until the [Full scan] menu is displayed.
3Press the 
knob to activate the automatic search.
»»This product automatically stores radio stations with sufficient signal strength.
»»After the search is complete, the first stored radio station is broadcast automatically.
4Turn the 
knob to select a station, and then press the 
knob to start listening.
Tip
•• You can
•• You can tune to a station manually (see "Use DAB menus" > "Tune to a station manually").
About special symbols
Some symbol may be displayed before the name of a station.
•H:The station is one of your 10 favorite stations.
•?:The station is unavailable or inactive.
•
:The station is a primary station with secondary service.
•
:The station is a secondary station.
Program radio stations
1Tune to a DAB radio station.
2Press PROGRAM to activate the programming.
3Turn the 
knob to select a preset sequence number.
4Press the 
knob to confirm.
»»The radio station is stored with the selected sequence number.
5Repeat steps
•To tune to a preset radio station, turn the PRESET knob until its frequency is displayed.
Note
•• If you store a radio station with the sequence number of another one, the earlier one is overwritten.
Display DAB information
On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station.
Press INFO repeatedly to cycle through the following information (if available).
•Dynamic label segment (DLS)
•Signal strength
•Program type (PTY)
•Ensemble name
•Frequency
10EN
