Caution:To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord.
How to connect a plug
The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L).
If the colors do not correspond with the colors on your plug, identify the terminals in your plug as follows:
1Connect the blue wire to the terminal marked N or colored black.
2Connect the brown wire to the terminal marked L or colored red.
3Do not connect either wire to the earth terminal in the plug, marked E (or e) or colored green (or green and yellow).
Before you replace the plug cover, make sure that the cord grip is clamped over the sheath of the cable and not just over the two wires in the cable.
Copyright in the U.K.
Recording and playback of material may require consent. see Copyright Act 1956 and The performer's Protection Acts 1958 to 1972.
EN 3
