INSTALLING YOUR DRIVE
audio) connector, labeled “Audio.” The unlabeled jumpers on both models are for factory testing only.
6.Plug a free IDE connector inside your PC into the drive’s socket. The cable’s colored edge must be aligned with the Pin 1 position.
Note: If you have a sound card that has an IDE port, you can either connect the CD-ROM drive to your PC or to the sound card. You must then disable the unused secondary IDE port. See Appendix A for what a secondary IDE port is and refer to your sound card, PC or IDE controller manual for the instructions on disabling the unused secondary IDE port.
7.If you have a sound card with a 4-pin CD-ROM audio connector, use the supplied audio cable to connect it to the drive’s “” connector (the “” connector on PCA103CD).
